From af2f8ca7a80433f2a7c45bc3b5d148291c26b6c7 Mon Sep 17 00:00:00 2001
From: alex <alex@ahubbard.xyz>
Date: Wed, 21 Sep 2022 21:33:00 -0500
Subject: [PATCH] *add vis to config update scripts

---
 .config/vis/colors/rainbow | 30 +++++++++++++
 .config/vis/config         | 90 ++++++++++++++++++++++++++++++++++++++
 .config/vis/vis.log        |  0
 .local/scripts             |  2 +-
 4 files changed, 121 insertions(+), 1 deletion(-)
 create mode 100644 .config/vis/colors/rainbow
 create mode 100644 .config/vis/config
 create mode 100644 .config/vis/vis.log

diff --git a/.config/vis/colors/rainbow b/.config/vis/colors/rainbow
new file mode 100644
index 0000000..13714c5
--- /dev/null
+++ b/.config/vis/colors/rainbow
@@ -0,0 +1,30 @@
+#1F80F3
+#08ADD8
+#06B3D4
+#01D7AF
+#01DBA9
+#0DF47E
+#26FE53
+#2CFF4B
+#4FF829
+#58F522
+#83DE0B
+#8FD506
+#ADBB01
+#BEAA01
+#D78C07
+#E27C0D
+#F65525
+#F94C2B
+#FE2A4D
+#FE2456
+#F20B81
+#D901AC
+#D501B2
+#B007D6
+#AA09DA
+#7C21F4
+#6D2DF9
+#5541FE
+#3E58FE
+#2A70F9
diff --git a/.config/vis/config b/.config/vis/config
new file mode 100644
index 0000000..fb2ad6d
--- /dev/null
+++ b/.config/vis/config
@@ -0,0 +1,90 @@
+#Refresh rate of the visualizers. A really high refresh rate may cause screen tearing. Default is 20.
+visualizer.fps=20
+
+#Defaults to "/tmp/mpd.fifo"
+#mpd.fifo.path
+
+#If set to false the visualizers will use mono mode instead of stereo. Some visualizers will
+#behave differently when mono is enabled. For example, spectrum show two sets of bars.
+audio.stereo.enabled=false
+
+#Specifies how often the visualizer will change in seconds. 0 means do not rotate. Default is 0.
+#visualizer.rotation.secs=10
+
+#Configures the samples rate and the cutoff frequencies.
+audio.sampling.frequency=44100
+audio.low.cutoff.frequency=60
+audio.high.cutoff.frequency=22050
+
+##Applies scaling factor to both lorenz and ellipse visualizers. This is useful when the system audio is set
+#to a low volume.
+visualizer.scaling.multiplier=1.0
+
+#Configures the visualizers and the order they are in. Available visualizers are spectrum,lorenz,ellipse.
+#Defaults to spectrum,ellipse,lorenz
+visualizers=spectrum,ellipse,lorenz
+
+
+#Configures what character the spectrum visualizer will use. Specifying a space (e.g " ") means the
+#background will be colored instead of the character. Defaults to " ".
+visualizer.spectrum.character=^
+
+#Spectrum bar width. Defaults to 1.
+visualizer.spectrum.bar.width=1
+
+#The amount of space between each bar in the spectrum visualizer. Defaults to 1. It's possible to set this to
+#zero to have no space between bars
+visualizer.spectrum.bar.spacing=1
+
+#Available smoothing options are monstercat, sgs, none. Defaults to sgs.
+visualizer.spectrum.smoothing.mode=monstercat
+
+#This configures the falloff effect on the spectrum visualizer. Available falloff options are fill,top,none.
+#Defaults to "fill"
+visualizer.spectrum.falloff.mode=fill
+
+#Configures how fast the falloff character falls. This is an exponential falloff so values usually look
+#best 0.9+ and small changes in this value can have a large effect. Defaults to 0.95
+visualizer.spectrum.falloff.weight=0.95
+
+#Margins in percent of total screen for spectrum visualizer. All margins default to 0
+visualizer.spectrum.top.margin=0.0
+visualizer.spectrum.bottom.margin=0.0
+visualizer.spectrum.right.margin=0.0
+visualizer.spectrum.left.margin=0.0
+
+#Reverses the direction of the spectrum so that high freqs are first and low freqs last. Defaults to false.
+visualizer.spectrum.reversed=false
+
+#Sets the audio sources to use. Currently available ones are "mpd" and "alsa"Sets the audio sources to use.
+#Currently available ones are "mpd", "pulse", "port", and "alsa". Defaults to "mpd".
+audio.sources=pulse
+
+##vis tries to find the correct pulseaudio sink, however this will not work on all systems.
+#If pulse audio is not working with vis try switching the audio source. A list can be found by running the
+#command pacmd list-sinks  | grep -e 'name:'  -e 'index'
+audio.pulse.source=0
+
+#vis tries to find the correct portaudio device (through portaudio default method), however its not for-sure.
+#If port audio is not working with vis try switching the audio srouce. A list can be found by setting
+#this value to "list" and checking the vis log file. Replace this value with the device name desired
+audio.port.source=auto
+
+#This configures the sgs smoothing effect on the spectrum visualizer. More points spreads out the smoothing
+#effect and increasing passes runs the smoother multiple times on reach run. Defaults are points=3 and passes=2.
+visualizer.sgs.smoothing.points=3
+visualizer.sgs.smoothing.passes=2
+
+
+#Configures what character the ellipse visualizer will use. Specifying a space (e.g " ") means the
+#background will be colored instead of the character. Defaults to " ".
+visualizer.ellipse.character=#
+
+#The radius of each color ring in the ellipse visualizer. Defaults to 2.
+visualizer.ellipse.radius=2
+
+## Turns off overriding the user's terminal colors
+#colors.override.terminal=false
+
+#Specifies the color scheme. The color scheme must be in ~/.config/vis/colors/ directory. Default is "colors"
+colors.scheme=rainbow
diff --git a/.config/vis/vis.log b/.config/vis/vis.log
new file mode 100644
index 0000000..e69de29
diff --git a/.local/scripts b/.local/scripts
index 657f44e..89870ee 160000
--- a/.local/scripts
+++ b/.local/scripts
@@ -1 +1 @@
-Subproject commit 657f44ecf09d6854ac6576ebbf11d680e93c987f
+Subproject commit 89870ee40a8c7333c5b8ae78c35f1bfe92823678