*add vis to config update scripts

master
alex 2022-09-21 21:33:00 -05:00
parent 18887b349e
commit af2f8ca7a8
4 changed files with 121 additions and 1 deletions

View File

@ -0,0 +1,30 @@
#1F80F3
#08ADD8
#06B3D4
#01D7AF
#01DBA9
#0DF47E
#26FE53
#2CFF4B
#4FF829
#58F522
#83DE0B
#8FD506
#ADBB01
#BEAA01
#D78C07
#E27C0D
#F65525
#F94C2B
#FE2A4D
#FE2456
#F20B81
#D901AC
#D501B2
#B007D6
#AA09DA
#7C21F4
#6D2DF9
#5541FE
#3E58FE
#2A70F9

90
.config/vis/config Normal file
View File

@ -0,0 +1,90 @@
#Refresh rate of the visualizers. A really high refresh rate may cause screen tearing. Default is 20.
visualizer.fps=20
#Defaults to "/tmp/mpd.fifo"
#mpd.fifo.path
#If set to false the visualizers will use mono mode instead of stereo. Some visualizers will
#behave differently when mono is enabled. For example, spectrum show two sets of bars.
audio.stereo.enabled=false
#Specifies how often the visualizer will change in seconds. 0 means do not rotate. Default is 0.
#visualizer.rotation.secs=10
#Configures the samples rate and the cutoff frequencies.
audio.sampling.frequency=44100
audio.low.cutoff.frequency=60
audio.high.cutoff.frequency=22050
##Applies scaling factor to both lorenz and ellipse visualizers. This is useful when the system audio is set
#to a low volume.
visualizer.scaling.multiplier=1.0
#Configures the visualizers and the order they are in. Available visualizers are spectrum,lorenz,ellipse.
#Defaults to spectrum,ellipse,lorenz
visualizers=spectrum,ellipse,lorenz
#Configures what character the spectrum visualizer will use. Specifying a space (e.g " ") means the
#background will be colored instead of the character. Defaults to " ".
visualizer.spectrum.character=^
#Spectrum bar width. Defaults to 1.
visualizer.spectrum.bar.width=1
#The amount of space between each bar in the spectrum visualizer. Defaults to 1. It's possible to set this to
#zero to have no space between bars
visualizer.spectrum.bar.spacing=1
#Available smoothing options are monstercat, sgs, none. Defaults to sgs.
visualizer.spectrum.smoothing.mode=monstercat
#This configures the falloff effect on the spectrum visualizer. Available falloff options are fill,top,none.
#Defaults to "fill"
visualizer.spectrum.falloff.mode=fill
#Configures how fast the falloff character falls. This is an exponential falloff so values usually look
#best 0.9+ and small changes in this value can have a large effect. Defaults to 0.95
visualizer.spectrum.falloff.weight=0.95
#Margins in percent of total screen for spectrum visualizer. All margins default to 0
visualizer.spectrum.top.margin=0.0
visualizer.spectrum.bottom.margin=0.0
visualizer.spectrum.right.margin=0.0
visualizer.spectrum.left.margin=0.0
#Reverses the direction of the spectrum so that high freqs are first and low freqs last. Defaults to false.
visualizer.spectrum.reversed=false
#Sets the audio sources to use. Currently available ones are "mpd" and "alsa"Sets the audio sources to use.
#Currently available ones are "mpd", "pulse", "port", and "alsa". Defaults to "mpd".
audio.sources=pulse
##vis tries to find the correct pulseaudio sink, however this will not work on all systems.
#If pulse audio is not working with vis try switching the audio source. A list can be found by running the
#command pacmd list-sinks | grep -e 'name:' -e 'index'
audio.pulse.source=0
#vis tries to find the correct portaudio device (through portaudio default method), however its not for-sure.
#If port audio is not working with vis try switching the audio srouce. A list can be found by setting
#this value to "list" and checking the vis log file. Replace this value with the device name desired
audio.port.source=auto
#This configures the sgs smoothing effect on the spectrum visualizer. More points spreads out the smoothing
#effect and increasing passes runs the smoother multiple times on reach run. Defaults are points=3 and passes=2.
visualizer.sgs.smoothing.points=3
visualizer.sgs.smoothing.passes=2
#Configures what character the ellipse visualizer will use. Specifying a space (e.g " ") means the
#background will be colored instead of the character. Defaults to " ".
visualizer.ellipse.character=#
#The radius of each color ring in the ellipse visualizer. Defaults to 2.
visualizer.ellipse.radius=2
## Turns off overriding the user's terminal colors
#colors.override.terminal=false
#Specifies the color scheme. The color scheme must be in ~/.config/vis/colors/ directory. Default is "colors"
colors.scheme=rainbow

0
.config/vis/vis.log Normal file
View File

@ -1 +1 @@
Subproject commit 657f44ecf09d6854ac6576ebbf11d680e93c987f
Subproject commit 89870ee40a8c7333c5b8ae78c35f1bfe92823678